 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SMBG5.0 thru SMG188CA Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in Unidirectional and Bidirectional * 600 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Meets MSL level 1, per J-STD-020C, LF max peak of 260 C * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 5.0 V to 188 V 600 W 100 A 150 C DO-215AA (SMBG) MAJOR RATINGS AND CHARACTERISTICS VWM PPPM IFSM (Unidirectional only) Tj max. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-215AA (SMBG) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: For unidirectional types the band denotes cathode end, no marking on bidirectional types DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use C or CA suffix (e.g. SMBG10CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform (1,2) (see Fig. 1) (2) SYMBOL PPPM IPPM IFSM TJ, TSTG VALUE Minimum 600 see next table 100 - 55 to + 150 UNIT W A A C Peak pulse current with a 10/1000 s waveform (1) Peak forward surge current 8.3 ms single half sine-wave uni-directional only Operating junction and storage temperature range Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal Document Number 88456 05-Jul-06 www.vishay.com 1 SMBG5.0 thru SMG188CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE MODIFIED GULL WING (+) (+) DEVICE MARKING CODE UNI KD KE KF KG KH KK KL KM KN KP KQ KR KS KT KU KV KW KX KY KZ LD LE LF LG LH LK LL LM LN LP LQ LR LS LT LU LV LW LX LY LZ MD ME MF MG MH MK ML MM MN MP MQ MR BI KD KE KF KG AH AK KL KM AN AP AQ AR AS AT AU AV AW AX KY KZ BD BE LF LG BH BK BL BM LN LM LQ LR BS BT LU LV BW BX BY BZ CD CE MF MG CH CK CL CM CN CP CQ CR BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) MIN 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 MAX 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 TEST CURRENT IT (mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 MAXIMUM REVERSE LEAKAGE AT VWM ID (A) (3) 800 800 800 800 500 500 200 200 100 100 50 50 20 20 10 10 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) 62.5 65.2 52.6 58.3 48.8 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.9 22.3 24.6 20.8 23.1 19.7 21.7 18.6 20.5 16.8 18.5 15.2 16.9 14.0 15.4 12.9 14.3 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 8.4 9.3 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 SMBG5.0 SMBG5.0A(5) (+)SMBG6.0 (+)SMBG6.0A (+)SMBG6.5 (+) SMBG6.5A (+) SMBG7.0 (+)SMBG7.0A (+)SMBG7.5 (+)SMBG7.5A (+)SMBG8.0 (+) SMBG8.0A (+)SMBG8.5 (+)SMBG8.5A (+)SMBG9.0 (+)SMBG9.0A (+) SMBG10 (+) SMBG10A (+)SMBG11 (+)SMBG11A (+)SMBG12 (+) SMBG12A (+) SMBG13 (+)SMBG13A (+)SMBG14 (+)SMBG14A (+) SMBG15 (+) SMBG15A (+)SMBG16 (+)SMBG16A (+)SMBG17 (+)SMBG17A (+) SMBG18 (+)SMBG18A (+)SMBG20 (+)SMBG20A (+)SMBG22 (+) SMBG22A (+) SMBG24 (+)SMBG24A (+)SMBG26 (+)SMBG26A (+) SMBG28 (+) SMBG28A (+)SMBG30 (+)SMBG30A (+)SMBG33 (+) SMBG33A (+) SMBG36 (+) SMBG36A (+) SMBG40 (+) SMBG40A www.vishay.com 2 Document Number 88456 05-Jul-06 SMBG5.0 thru SMG188CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE MODIFIED GULL WING (+)SMBG43 (+)SMBG43A (+)SMBG45 (+)SMBG45A (+) (+) DEVICE MARKING CODE UNI MS MT MU MV MW MX MY MZ ND NE NF NG NH NK NL NM NN NP NQ NR NS NT NU NV NW NX NY NZ PD PE PF PG PH PK PL PM PN PP PQ PR PT PS BI CS CT MU MV MW MX MY MZ ND NE NF NG NH NK NL NM NN NP NQ NR NS NT NU NV NW NX NY NZ PD PE PF PG PH PK PL PM PN PP PQ PR PT PS BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) MIN 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 209 209 MAX 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102 92.1 106 95.8 115 104 122 111 136 123 149 135 163 147 176 159 204 185 218 197 231 209 255 231 TEST CURRENT IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 188 188 MAXIMUM REVERSE LEAKAGE AT VWM ID (A) (3) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) 7.8 8.6 7.5 8.3 7.0 7.8 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 5.0 4.3 4.8 4.0 4.4 3.8 4.1 3.4 3.7 3.1 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 1.7 2.0 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 344 328 SMBG48 SMBG48A (+) SMBG51 (+) SMBG51A (+) SMBG54 (+) SMBG54A (+) SMBG58 (+)SMBG58A (+)SMBG60 (+)SMBG60A (+) SMBG64 (+) SMBG64A (+) SMBG70 (+) SMBG70A (+) SMBG75 (+) SMBG75A (+) SMBG78 (+) SMBG78A (+) SMBG85 (+) SMBG85A (+) SMBG90 (+) SMBG90A (+)SMBG100 (+)SMBG100A (+)SMBG110 (+)SMBG110A (+) SMBG120 (+) SMBG120A (+) SMBG130 (+) SMBG130A (+)SMBG150 (+) SMBG150A (+) SMBG160 (+) SMBG160A (+) SMBG170 (+) SMBG170A SMBG188 SMBG188A Note: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMBG/SMBJ5.0CA, the maximum V(BR) is 7.25 V (6) VF = 3.5 V at IF = 50 mA (uni-directional only) (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices www.vishay.com 3 Document Number 88456 05-Jul-06 SMBG5.0 thru SMG188CA Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient Typical thermal resistance, junction to lead SYMBOL RJA RJL VALUE 100 20 UNIT C/W C/W ORDERING INFORMATION PREFERRED P/N SMBG5.0A-E3/52 SMBG5.0A-E3/5B UNIT WEIGHT (g) 0.096 0.096 PREFERRED PACKAGE CODE 52 5B BASE QUANTITY 750 3200 DELIVERY MODE 7" Diameter Plastic Tape & Reel 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 150 Tj = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) tr = 10 sec Peak Value IPPM 10 100 Half Value - IPP 2 IPPM 50 10/1000 sec Waveform as defined by R.E.A. 1 0.2 x 0.2" (0.5 x 0.5 mm) Copper Pad Areas 0.1 0.1 s td 0 0 1.0 2.0 3.0 4.0 1.0 s 10 s 100 s 1.0 ms 10 ms td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 100 6000 75 CJ - Junction Capacitance (pF) Measured at Zero Bias 1000 50 100 25 VR, Measured at Stand-off Voltage VWM Uni-Directional Bi-Directional Tj = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 200 0 0 25 50 75 100 125 150 175 200 10 1 10 TJ - Initial Temperature (C) VWM - Reverse Stand-off Voltage (V) Figure 2. Pulse Power or Current versus Initial Junction Temperature Figure 4. Typical Junction Capacitance www.vishay.com 4 Document Number 88456 05-Jul-06 SMBG5.0 thru SMG188CA Vishay General Semiconductor 100 200 Transient Thermal Impedance (C/W) Peak Forward Surge Current (A) 8.3 ms Single Half Sine-Wave Unidirectional Only 100 10 1.0 0.1 0.001 10 0.01 0.1 1 10 100 1000 1 10 100 tp - Pulse Duration (s) Number of Cycles at 60 Hz Figure 5. Typical Transient Thermal Impedance Figure 6. Maximum Non-Repetitive Peak Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-215AA (SMBG) Cathode Band Mounting Pad Layout 0.165 (4.19) 0.083 (2.10) 0 .077 (1.96) 0.155 (3.94) 0.130 (3.30) 0.085 (2.16) 0.060 (1.27) 0.180 (4.57) 0.160 (4.06) 0.016 (0.41) 0.006 (0.15) 0.058 (1.47) 0.020 0.038 (0.97) (0.51) Max. 0.255 (6.48) 0.235 (5.97) 0.095 (2.41) 0.075 (1.90) 0.008 (0.20) 0.004 (0.10) 0.030 (0.76) 0.015 (0.38) SEATING PLANE Document Number 88456 05-Jul-06 www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1 |
Price & Availability of SMBG50A-E352
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |